Home » Products » Expansion Vessel » 0.5L~12L Expansion Vessel

0.5L~12L Expansion Vessel

HVAC Expansion Tank
Item Capacity (L) Maximum Working Pressure (bar) Diameter (mm) Height (mm) Connector Diameter Packaging Volume
TY-04-12L 12 6 270 350 1" 27x27x35cm
HVAC Expansion Tank TY-03-2L
Item Capacity (L) Maximum Working Pressure (bar) Diameter (mm) Height (mm) Connector Diameter Packaging Volume
TY-03-2L 2 10 140 235 1/2" 48.5x57x28.5cm/16PC
HVAC Expansion TankTY-03-0.5, 1, 2L
Item Capacity (L) Maximum Working Pressure (bar) Diameter (mm) Height (mm) Connector Diameter Packaging Volume
TY-03-0.5L 0.5 10 96 160 1/2" 48.5x32x39cm/40PC
TY-03-1L 1 10 115 195 1/2" 58x39 5x23.5cnV20PC
TY-03-2L 2 10 140 235 1/2" 48.5x57x28.5cm/16PC

The HVAC expansion tank serves to absorb the expanded volume of water due to thermal expansion in the air conditioning system so that the system pressure stays relatively the same throughout the heating or cooling cycle. Pressure increase inside the air conditioning system is likely to cause stagnation, a situation where no water enters the system for heat exchange.

In most cases, the HVAC expansion tank should work together with the automatic vent valve, makeup water valve, and the safety valve to keep system pressure at a normal level. In a residential central air conditioning system, the expansion tank is connected to the pipe of heat transfer medium on one side, and the other side contains air. As the system pressure increases to a point greater than the pre-charged air pressure in the tank, some amounts of heat transfer medium, water for example, enters the tank to offset that pressure increase. On the other hand, when the system pressure drops, the precharged air inside the tank pushes some water out into the system to make up for the pressure loss. This cycle repeats throughout the heat exchange process to maintain a constant pressure in the air conditioning system.

Technical Specs of HVAC Expansion Vessel

Item Capacity (L) Maximum Working Pressure (bar) Diameter (mm) Height (mm) Connector Diameter Packaging Volume
TY-04-5L 5 6 155 300 1" 16x16x31cm
TY-04-8L 8 6 200 340 1" 20x20x34cm

Expansion tank: Used for air conditioning and thermodynamic systems.
Pre-charge pressure: 1.5 bar. Stainless steel connector.

Inquiry Form